18
The ENDAT-7301M System Board
DRAM Clock/Drive Control
Item
Available Options:
Current FSB Frequency
Current DRAM Frequency
DRAM Clock
By SPD
DRAM Timing
Auto By SPD
․
DRAM Clock
Allows customer set the DDR frequency.
․
DRAM Timing
The value in this field depends on performance parameters of the installed
memory chips (DRAM). Do not change the value from the factory setting unless
you install new memory that has a different performance rating than the original
DRAMs.
AGP & P2P Bridge Control
Item
Available Options:
AGP Aperture Size
128M
VGA Share Memory Size
64M
Direct Frame Buffer
Enabled
Select Display Device
CRT
Panel Type
1024x768x24 1CH
․
AGP Aperture Size (MB)
This function determines the amount of system memory that is given to the AGP
card. This is a dynamic memory allotment in that the AGP card will only use the
amount of memory that it needs. The remaining memory, which is not in use, will
be available for the system.
<Choice: 32MB, 64MB, 128MB, 256MB, 512MB, 1G>
․
VGA Share Memory Size
This field is used to select the onboard VGA’s frame buffer size that is shared
from the system memory.
<Choice: Disabled, 16M, 32M, 64M, 128M>
․
Select Display Device
This field is used to select the type of display to use when the system boots.
<Choice: CRT, LVDS, DVI, CRT+LVDS, CRT+DVI, LVDS+DVI>
