manualshive.com logo in svg

Unicorn Computer ENDAT-3702, User Manual

Share
Download
Unicorn Computer ENDAT-3702 User Manual Download Page 43

User’s Manual

 

37

 

 

 

When finishing with the Windows platform (95/98/2000/NT) installation, please 
install the relative VIA driver (

4in1)

 

utilities for compliance of the compatibility 

with hardware environment.    

We strongly recommend using the 4in1

 

driver to install the system since 

the 4in1 driver will automatically detect  / update the necessary drivers. 

This driver will automatically detect and install the latest utilities as following:  

IDE Bus master , VIA AGP Driver, 

IRQ Routing Driver, VIA INF Driver 

LAN Driver:

 Install the LAN driver for on-board LAN adapter. Please refer to 

Chapter 5.  the 

Realtek 8139 LAN Driver Installation Procedure.

 

VGA Driver:

 Install the VGA driver for on-board AGP VGA adapter  

Please download or check from VIA Web-site: 

www.via.com.tw

 if you 

prefer to install the drivers individually or you need more information. 

Summary of Contents for ENDAT-3702































































Reviews:

No comments

Brands by name

Popular brands

Load more brands