15
Step 3.
Click the receiver settings button to configure the NMEA message output. It is
recommended to configure GPGGA, GPGSV, and other messages.
Figure. 4-6 NMEA Data Output
Step 4.
Click the receiver settings button, configure the NMEA message output, and click
send. It is recommended to configure GPGGA, GPGSV, and other messages.
Step 5.
In the data session window, click “Send all Message” to complete all the NMEA
message output (update rate 1Hz). Right click in the data session window to
adjust: output log font size, stop / resume log output, or clear log content, etc.
Step 6.
Use various views of UPrecise to configure or input commands as required.
5. LED Indicators
Three LED indicators are installed on UB482 board to indicate the basic working status of
the board, which includes:
No
Color
Status
Instruction
Remark
1
Red
On
Power on
2
Off
Power off
3
Green
On
PV indicator, RTK FIX is enabled
4
Off
PV indicator, RTK FIX is disabled
5
Yellow
On
Single point positioning is enabled
6
Off
Single point positioning is disabled
