UB4B0M User Manua
l
14
velocity and time (Trajectory View)
Graphic interface for data logging and sending commands to the receiver
(Logging Control View)
Console window for sending commands to the receiver (Console View)
Sending commands to the receiver
Displaying the track point
Upgrading the firmware
TTFF test
Figure. 4-4 UPrecise Interface
4.4.1
Operation Steps
Step 1.
Follow 4.2 Installation Guide to connect the power source, antenna to the board,
and turn on the EVK switch
Step 2.
Click file - > connect the serial port, and set the baud rate; the default baud rate of
UB4B0M is 115200bps
Figure. 4-5 Connect the Serial Port
