UB482 User Manual
12
4
Installation and Configuration
4.1
ESD Handling Precautions
UB482 Board
is an ESD sensitive device and special precautions when handling are
required.
⚫
Electrostatic discharge may cause damages to the device. All operations
mentioned in this chapter should be carried out on an antistatic workbench,
wearing an antistatic wrist strap and using a conductive foam pad
⚫
Hold the edge of the board, and do NOT directly touch the electronic
components
4.2
Installation Guide
The user may assemble UB482 flexibly according to application scenarios and market
needs. The following figure shows a typical installation of the UB482 using the
Evaluation Kit (EVK).
Figure 4-1 UB482 Typical Installation Diagram
Please inspect the shipping cartons for any signs of damage or mishandling before
unpacking the UB482 package. The following items are required to install the UB482
board correctly:
1.
UB482 EVK suite (or evaluation board)
2.
User manual
3.
UPrecise software
4.
Qualified antenna
5.
MMCX antenna cable
6.
A PC or Laptop with serial ports (Win7 and above), with UPrecise installed
