Press battery cover slightly and push to the direction of the arrow to open.
For the Emergency use
: If [Open / Lock] button is not working, then just turn the
manual lock by finger to open.
Deadbolt
Manual Lock
Open/Lock button
▶
When auto lock is set
▶
When manual lock is set
Default setting is auto lock so the door
will be locked automatically in 3 seconds
after it's closed.
Press [Open / Lock] button of Back Ass'y or turn the manual lock knob to
[Locked] position to lock the door.
▶
Auto locking mode
▶
Manual locking mode
Auto, Manual locking mode
Attention
Auto relocking function :
When the door is not opened within 7 seconds after
the lock is open, the door is relocked automatically.
Open battery cover and
press [Register button]
Open battery cover and
press [Register button]
After the door is opened, auto locking sensor detects auto locking status.
When the door is open(auto locking detect sensor is not working),
push up [Keypad cover] and press [
] button to lock the door.
[Register button]
[Register button]
(Default setting is auto locking mode.)
1. When the auto lock function is set, if the door is closed, it will be locked
automatically within 3 seconds.
2. User can set the manual lock function to unset the auto lock function
to lock the door only when it's necessary.
Attention
1. If no button is pressed within 7 seconds after push up the [Keypad cover],
entering mode will end with error sound.
2. When [Keypad lamp] is off, press [
] button and enter password.
Then, the door will be opened with melody.
Product Composition
Registering and changing the password
Name of parts (Front Ass'y)
Name of parts (Back Ass'y)
To open the battery cover
Locking the door from inside
315N
315D
315S
AA Battery 4pcs
Bolts for installation
Strike & Strike spacer
User Manual
Digital Keys
(315D model only)
Smart keys
(315S model only)
Emergency
power terminal
Smart key
touch point
(315S)
Front Ass'y
Opening the door from outside
▶
Opening the door with password
▶
Opening the door with
digital key (315D)
Push [Keypad cover] up. Push down the cover after pressing password and
the door will be opened with melody.
[Entering password]
Caution
Caution
Registering the digital key/smart key (for 2way only)
※
When you register new digital key, smart key or register it again, you need to
register all digital key or smart key at a time.
Press [Register button] and [0] button for 5 seconds and all registered
digital keys or smart keys will be deleted.
2. Open [Keypad cover] of Front Ass'y
and press password (4 ~ 12 digit) except
[
] and [ # ] buttons.
1. Open [Battery cover] of the Back
Ass'y and press [Register button]
once briefly.
5. Password registration is finished
if you press [Registraion button].
3. Press [
] to save.
4. To register another password,
repeat No. 2 & 3.
1. Open [Battery cover]
and press [Register button]
briefly.
2. Place the digital key or
smart key on the touch
point of the front ass'y.
(Whenever you contact it,
registration is done with
beep sound).
3. Press [Register button]
to complete registration.
(Up to 3 passwords can be registered)
The door must be open while registering the password.
Default password is 1,2,3,4.
▶
Deleting digital key or smart key
1. In case of registering more than 1 password, all process should be done
at a time. (Existing passwords will be deleted when registering new password)
2. When all three passwords are registered, Registration mode will be
automatically end.
3. If no password is entered within 7 seconds while registering password,
registration will be cancelled.
Register
button
Default setting is auto lock so the door
will be locked automatically in 3 seconds
after it's closed.
Locking the door from outside
Push the [Keypad cover] up and press [
] button to lock the door.
▶
When manual lock is set
▶
When auto lock is set
Opening the door from inside
Press [Open / Lock] button of the Back Ass'y or turn the manual lock knob to
[Open] position to open the door.
Back Ass'y
Digital key
touch plate
(315D)
Keypad cover
Keypad
Auto Lock Latch
Mounting Plate
1. Place the registered digital key
to [Digital key touch plate].
2. After beep sound, the door will be
opened.
1. Place the registered smart key
to [Smart key touch point].
2. After beep sound, the door will be
opened.
▶
Opening the door with
smart key (315S)
Installation Template
As this is a keyless digital door lock, damage may occur
to parts of the dead lock system if it is not used according
to the manual. Users should be fully aware of the manual
and how to operate this product.
CAUTION
315 Series
User Manual
Warning
Safety precautions
The precautionary measures are for the safety of the user, for the prevention
of property damage, and for the avoidance of any inconveniences due to
an accident. These must be read and followed properly.
•
Do not disassemble or alter the lock.
UNICOR HIGHTECH CO., LTD
- This manual may change without notice in case of product improvement.
- Product specifications are subject to change without prior notice.
- This manual should not be edited or changed without manufacturer's permission.
•
Do not install where the distance over 5mm
between the door and door frame.
•
Please do not expose the password and change the
password in regularly.
•
Please do not mix old with new batteries or use
different types. Always use new alkaline batteries.
•
Do not clean the product with flammable materials
such as alcohol, benzene or thinners. Such
materials may damage the surface or cause a fire.
•
Replace the current batteries with new ones within
1 week after the battery replacement notification
melody sounded off for the first time.
•
Do not press using sharp tools or press numeric
button excessively.
•
Make sure the door is completely locked when
going out.
•
Batteries should not be exposed directly to heat
sources or flames, or submerged in water, because
they may leak or explode, resulting in severe
damage. Please do not use damaged batteries.
•
Place the batteries carefully and correctly
according to their polarity (+/-). If the batteries
are inserted in a wrong way, differently from the
indicated direction or polarity, leakage or rupture
could occur. Pay attention to it.
Installation Template
Folding line
for standard
f ire-proof door
Folding line
for one-side
open or
both-side
open door
32mm diameter hole
32mm diameter hole
