Introduction
Congratulations on purchasing a quality UNICOM product.
Unicom’s
VELOCITY Series
represents the newest, most advanced
generation of signal conversion technology.
This conver ter is designed to expand your network through a fiber optic
connection extending a fiber link up to 60 km (Single mode in full duplex
mode).
The 10/100TX/100FX Conver ters offer the most popular fiber cabling
connectors: SC and ST formats in Multi-mode and SC in Single Mode.
The UTP por t suppor ts the Auto MDI/MDIX function and there are 4 DIP
switches to set the operation mode for the UTP, Fiber por ts and Link
Loss For warding function. These conver ters can be used in Unicom’s 10
bay media chassis or as stand-alone components.
Key Features
■
Complies with IEEE 802.3, 802.3u, 802.3x standards.
■
Conver ts between UTP cabling and Fiber Optic cabling.
■
One RJ-45 connector, Auto-MDI/MDIX for UTP por t.
■
Suppor ts 10/100 Mbps Auto-negotiation for UTP por t.
■
Fiber cabling connectivity up to 60Km.
■
Uses store-and-for ward switching to separate collision domains.
■
One fiber connector (SC/Single Mode, SC or ST/Multi-Mode) for
100Base-FX.
■
Prevents packet loss by suppor ting back-pressure & flow control.
■
Four DIP-switches for operation mode setup and Link-Loss
For warding function.
■
Per por t LEDs for diagnosis and maintenance
■
External DC power adapter, 5V/2.5A
■
Can be mounted in chassis or used as stand-alone.
■
FCC Class A, CE Mark cer tification
Product Specifications
Standard Compliance:
IEEE 802.3u 10Base-T/100Base-TX/100Base-
FX Fast Ethernet Standards
Interface:
(1) 100Base-TX Shielded RJ-45 Jack
(1) 100Base-FX Dual SC or ST connector
Wavelength:
1310nm.
Link Distance:
100 m Max., Categor y 5e/6 UTP/ScTP
2 km Max.,
FEP-5300TF-T or FEP-5300TF-C
15 km Max., FEP-5400TF-C
30 km Max., FEP-5401TF-C
60 km Max., FEP-5402TF-C
DIP Switch:
ON/OFF (x4) Loss Link For warding
LED Indicators:
Power, Link/Activity, Receive/Full-Duplex, 100
Power Supply:
External power adapter 5V DC / 2.5A
Operating Temperature:
0˚C to 55˚C
Operating Humidity:
10% - 80% RH
EMI:
FCC Class A, CE Mark
Enclosure:
Metal
Dimensions:
4.72"(L) x 3.36"(W) x .96"(H)
118mm x 84mm x 24mm
Warranty:
Limited Lifetime
FCC Statement
This equipment has been tested and found to comply with the limits for a class B
device, pursuant to par t 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful inter ference in a commercial installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with instructions, may cause harmful
inter ference with radio communications. Operation of this equipment in a
residential area is likely to cause harmful inter ference, in which case, the user will
be required to correct the inter ference at the user’s expense.
9
2
