Unicol WB0, Instructions, Page: 4 / 4

4
Revised 29/09/22
01865 767676
sales@unicol.com
www.unicol.com
STEP 1 – (WB, 02 & 2)
Unscrew Through-Bolts located on the sockets of
the Wall Arm and PSU. Place column onto the Peg of
the Wall Arm and push upwards. Refit Through-Bolt
ensuring it locates through the peg of the Wall Arm.
Repeat this operation to join the PSU to the other end
of the column.
STEP 2 – (WB, 02 & 2)
Fully tighten both Through-Bolts. Take up any slack
using grub screws in socket.
Cable through column and apertures in Wall Arm &
PSU sockets.
Follow PSU Instructions to fit Projector.
STEP 1 – (WB, 02 & 2)
Unscrew Through-Bolts located on the sockets of the
Wall Arm and Screen Mount Adapter. Place column
onto the Peg of the Wall Arm and push upwards. Refit
Through-Bolt ensuring it locates through the peg of
the Wall Arm. Repeat this operation to join the Screen
Mount Adapter to the other end of the column.
STEP 2 – (WB, 02 & 2)
Fully tighten both Through-Bolts. Take up any slack
using grub screws in socket.
Cable through column and apertures in Wall Arm &
Screen Mount Adapter sockets.
Follow PZX/W, PLX/W Instructions to fit Screen.
WB, 02 & 2 – Adding PSU & Column
WB, 02 & 2 – Adding Screen Mount Adapter & Column
Typical
PSU
shown
Typical Screen
Mount Adapter
PS1 shown