Unicol WB0, Instructions, Page: 3 / 4

01865 767676
sales@unicol.com
www.unicol.com
3
Revised 29/09/22
STEP 1 – (WB, 0, 02, 1 & 2)
Determine where you want to install your wall arm.
Mark and fix into position through the six fixing holes
using suitable anchors & screws.
Please consider cabling and wall fixings prior to
installation. Please check surface is capable of
supporting 5x the combined solutions weight.
STEP 2 – (WB, 0 & 1)
Unscrew Through-Bolt located on the socket of the
PSU. Locate socket onto the Peg of the Wall Arm and
push upwards. Refit Through-Bolt ensuring it locates
through the peg of the Wall Arm.
STEP 3 – (WB, 0 & 1 )
Unscrew Through-Bolt located on the socket of the
Screen Mount Adapter. Locate socket onto the Peg of
the Wall Arm and push upwards. Refit Through-Bolt
ensuring it locates through the peg of the Wall Arm.
STEP 4 – (WB, 0 & 1 )
Fully tighten Through-Bolts. Take up any slack using
grub screws in sockets.
Cable along wall arm & apertures in Screen Mount
Adapter & PSU sockets.
Follow PZX/W, PLX/W Instructions to fit Screen.
Follow PSU Instructions to fit Projector.
WB, 0, 02, 1 & 2 Wall Fixing
WB, 0 & 1 – Adding PSU
WB, 0 & 1 – Adding Screen Mount Adapter
Typical Screen
Mount Adapter
PS1 shown
Typical
PSU
shown