4
01865 767676
www.unicol.com
Revised 15/12/20
STEP 4
Position your mount by ensuring that the handle of
the mount will sit just above the edge of the screen
(see below). Once positioned, mark and drill 4x
fixing holes each side. Fix in place using 8x suitable
fixings (not supplied).
STEP 5
Return equipment tray to cassette and cable
up your media equipment using the cable
management system on the side of the mount.
STEP 5
Fix arms to screen. There are two ways of doing
this as shown above. This is dependent on your
screens VESA pattern.
STEP 6
Hook arms onto the mount. Hook on at correct
height so as the handle is always covered by the
screen (as shown above).
edge of screen
Small VESA Patter
ns
Large VESA Patter
ns
