Unicol RHL100 Manual Download Page 4

Page: 4 / 4

Revised 09/11/23

01865 767676

www.unicol.com

STEP 8

Once all set up, take the supplied kettle lead and

plug into the bottom of the Rhobus mast and

into a wall socket. The stand will now have power

throughout.

STEP 7

Gently lower the screen until the arms are securely

hanging on top of the back plate. Once centered,

adjust the level of the screen with the two top

screws on the mount arms. Once levelled secure the

screen by tightening the bottom two screws.

STEP 6

Line the screen and arms up with the secured back

plate and offer it up at a slight angle - allowing the

top of the arms to hook over the lip of the back

plate.

STEP 5

Locate the mounting holes on the back of your

screen. Line the two mounting arms up and using

the taglocks/two part spacers provided and the

manufacturer recommended screws, attach the

arms to the back of the screen.

Summary of Contents for RHL100

Page 1: ...d the maximum load capacity Please also layout all components to ensure that you have all of the required parts before proceeding see BOM list on following page Use of this product for anything other...

Page 2: ...t tray handles power socket 1 2 Universal Mount Back Plate 1 3 Universal Mount Arms 2 4 7 5cm Castors 2 standard 2 braked 4 5 Standard Rhobus Lite Base 1 6 Alternative Stand Feet 4 7 2m Kettle Lead 30...

Page 3: ...he power socket on each side of the mast and remove the equipment tray 3 You can now populate this tray place it back in after step 3 STEP 3 Place 2x screws in the bottom two rivnuts of the mount back...

Page 4: ...d adjust the level of the screen with the two top screws on the mount arms Once levelled secure the screen by tightening the bottom two screws STEP 6 Line the screen and arms up with the secured back...