Unicol RHL100 Manual Download Page 3

Page: 3 / 4

Revised 09/11/23

01865 767676

www.unicol.com

STEP 1

Connect base to mast as shown above via 6 fixing

holes.

For a stand version, insert the plastic feet. For a

trolley version, tap castors with the rubber mallet

until they lock into place (ensure braked castors are

at the front).

STEP 2

Unlock and lift out rear door.

Twist the lock

located underneath the power socket

on each side of the mast and remove the equipment

tray.

You can now populate this tray - place it back

in after step 3.

STEP 3

Place 2x screws in the bottom two rivnuts of the

mount back plate and slot into chosen keyholes in

mast. From the rear, screw in top two screws into

the back plate and fully tighten all 4 screws.

Place equipment tray back in and lock into place.

STEP 4

Feed cables for screen and equipment tray through

hole in backplate and on top of the mast.

Once finished connecting all cables, place the rear

door back and lock into place.

Summary of Contents for RHL100

Page 1: ...d the maximum load capacity Please also layout all components to ensure that you have all of the required parts before proceeding see BOM list on following page Use of this product for anything other...

Page 2: ...t tray handles power socket 1 2 Universal Mount Back Plate 1 3 Universal Mount Arms 2 4 7 5cm Castors 2 standard 2 braked 4 5 Standard Rhobus Lite Base 1 6 Alternative Stand Feet 4 7 2m Kettle Lead 30...

Page 3: ...he power socket on each side of the mast and remove the equipment tray 3 You can now populate this tray place it back in after step 3 STEP 3 Place 2x screws in the bottom two rivnuts of the mount back...

Page 4: ...d adjust the level of the screen with the two top screws on the mount arms Once levelled secure the screen by tightening the bottom two screws STEP 6 Line the screen and arms up with the secured back...