01865 767676
www.unicol.com
3
Revised 08/11/19
STEP 4
Place column couplers into columns so that the
open jaws are at the top and the grub screws align
with the half-moon notch at the rear. (Ensure grub
screws are screwed out enough to hold the column
coupler in place).
STEP 2
All columns have a half-moon notch at one end
and 2 of the columns will have holes at 75mm from
one end. Place the 2 columns with holes over the
crocodile lugs on the base.
STEP 1
Turn the base upside down and push each castor
until it clicks into place. Please ensure that the
castors with brakes are located at the front.
Place base on the floor and apply brakes on front
wheels by pressing brake lever down.
STEP 3
Ensure that the holes line up with the grub screws
at the rear of the crocodile lugs. Gently tighten the
grub screws.
