Bulletin 30-122.2014.04.006
13
Copyright © 2014 Unico, Inc.
(SAC xx.xxxx.xxx.xx)
It is possible to change the temperature units from Celsius (°C) to Fahrenheit (°F) or back
again.
1. Press the
GREEN
button to turn ON the remote.
2. Next, press and hold the
Filter/Shift
button for 6 seconds to enter the
Special
Functions
mode. You will see the word “Filter” appear on the remote control display.
3. Press the “+” button until the number displayed reaches 77. The “-” button can also be
used to reach 77, but this will not change the display from Celsius to Fahrenheit, or vice-
versa.
4. To finish the switch, press and hold the
Filter/Shift
button for 6 seconds. This will cause the
remote to exit the
Special Functions
mode. The display should now have switched between
Celsius and Fahrenheit.
5. Repeating this process will cycle between Fahrenheit and Celsius display modes.
“°F” is not shown when displaying the temperature using Fahrenheit units.
“°C” will show only when temperature is in Celsius units.
Refer to the Operation manual for the remote control features and functions.
TEMPERATURE DISPLAY (UNIT OF MEASURE)
REMOTE CONTROL FUNCTIONS
