9
RD1041K/RD1041Q/RD1041QD
Connect to USB devices
■
Plug USB peripherals into the USB ports of front panel. Note that the USB ports of rear
panel are not available for USB hub function.
RS-232 control
■
Serial control is one of the features of RD1041. User can contorl RD1041 by sending
commands from a PC as well. Please connect RS232 connector to a PC, and plug the
other end of RJ45 connector into RD1041. For more detailed operations, refer to page 18.
■
Please follow the table below for more pin assignment details.
1 - 8
5 - 1
9 - 6
Signal
RS232 pin number
RJ45 pin number
Tx
2
5
Rx
3
6
GND
5
7
* Make sure the driver of USB peripheral has been installed if necessary before
plugging into RD1041. To install the driver, please remove the USB peripheral first.
