23
Item
Sub-item
Option
Description
Function
Video over IP
Enable/disable the copy function from EDID compliant monitors automatically.
Serial over IP
Baudrate setting
Setup the baudrate settings.
EDID configuration
■
To copy the EDID information, tick the option of Copy EDID from this Video Output. The EDID
information will be copied each time power on the Receiver.
■
Alternatively, remove the power of Receiver. Hold the devices button and then power on the unit
again. Release the Deceive button when the Device indicator flashes.
■
Click the Apply after ticking/unticking the Copy EDID from this Video Output.
Baudrate settings
■
This option allows to set the baudrate of Transmitter, Extender Receiver/VideoWall Receiver manually.
Make sure the settings must match with the RS-232 device you have connected. By default, the system
settings are as following:
Baudrate: 115200 Data bits: 8 Parity: None Stop bits: 1
■
Click the Apply once the baudrate settings have been changed.
