10.
Installation of lip seal
- continued
Disassembly of the body
III. Assembly of the snap ring
Tools required:
•
Snap ring pliers
(hole)
•
Installer ring
Procedure:
Insert the snap ring into nose section
(tapered
part of the snap ring must be facing downwards as shown in
photo).
Push the snap ring downward with the remover, and
fit into groove.
IV. Assembly of the felt seal
Tools required:
•
Installer ring
Procedure:
Install the felt seal into the nose section. Push the
felt seal until it touches the snap ring.
Caution - O-ring should not be reused.
I. Removal of oil
Procedure:
Remove the drain plug and drain the oil.
II. Removal of lipseal
(Refer to page 9 for instructions)
III. Removal of the bolts on rear cap
Tools required:
•
Socket wrench
(hexagon)
10mm
•
Stand
Procedure:
Remove the M10 securing bolts
(5pcs)
from the
rear cap.
IV. Removal of the rear cap
Procedure:
Remove the rear cap by gently inserting a screw
driver or lever into the recess. Lever all around, not just at one
position.
Caution - Do not damage the end of front cap and body.
(-) Driver
