15 SAFETY REGULATIONS
68
When lifting TS trucks
When lifting a TS truck that has free view frames, the lifting
holes in the outer mast must be used (point B)
On machines with other mast types the lifting strap is attached
round the upper mast strut (point C).
Assembling and putting into service
WARNING!
Assembling/dismantling and putting the truck into
service may only be carried out by an authorised
service technician.
The following actions are to be taken in order to make the truck
ready for use.
•
Charge the battery.
•
Perform an inspection in accordance with
Daily
maintenance (before each shift)
page 40.
•
Visually inspect the truck, including the forks, for signs of
damage.
•
Check that the safety and warning signs are in place and
are legible. See
Safety and warning signs
page 71.
Temporarily taking the truck out of service
Storage
If the truck is to be taken out of service for more than a month, it
should be stored indoors in dry and frost-free premises.
Actions before storage
1)
Clean the truck.
2)
Clean and charge the battery in accordance with the
battery manufacturer's maintenance instructions.
3)
Check the oil level in the hydraulic system by looking at the
markings on the truck, or alternatively by pushing all the
hydraulic cylinders to their fully extended positions. Top up
the oil if necessary.
4)
Check the braking effect on the main brake and parking
brake.
Instruction Handbook PLL, PLE, PSL, PSD, PS, PSH, PLP, TS — D002652, B, GBR, ForTranslation
