SERVICING AND MAINTENANCE 14
59
Torque
The bolts must be tightened to a torque of
47
Nm
.
Dismantling and assembling the castor wheel, TS
Lift the wheel off the ground and secure the truck with blocks.
WARNING!
Ensure that the truck is unable to move while work is
in progress.
1)
Remove the plastic cover from the machine housing.
2)
Remove the securing bolts.
3)
Take out the castor wheel assembly and support the fork in
a vice.
4)
Tap out the retaining pin, drive out the wheel axle and
remove the wheel from the fork.
NOTE!
In connection with a wheel change, the
retaining pin should also be replaced.
5)
Install in the reverse order.
Torque
The bolts must be tightened to a torque of
47
Nm
.
Dismantling and assembling the drive wheel
Pull out the battery plug.
1)
Loosen the drive wheel nuts, without removing them.
2)
Lift the load wheel off the ground and secure the truck with
blocks.
WARNING!
Ensure that the truck is unable to move while
work is in progress.
3)
Remove the wheel nuts and remove the drive wheel.
4)
Install in the reverse order.
Tighten the wheel nuts crosswise, to:
Torque
PLL, PLE, PSL, PSD, PS, PSH:
80 Nm
Torque
PLP:
84 Nm
Torque
TS:
135 Nm
Start the truck and test drive in both directions. The wheel must
not catch or jam.
Instruction Handbook PLL, PLE, PSL, PSD, PS, PSH, PLP, TS — D002652, B, GBR, ForTranslation
