23
Technical features and dimensions
ENGLISH
1
2
3
14
13
12
4
5
6
10
11
7
8
9
3.11 -
asseMBling casing
note:
for
XC-K 3 1000
Items in pos.
5
and
8
are not supplied
for XC-K 3 2500
and
XC-K 3 3000
Items in pos.
3 - 11 - 12 - 13 - 14
are not
supplied and side casing are 4.
assembly sequence
A) mount shelf
(pos. 15)
to the support
(pos. 16)
mount electrical panel on the shelf (pass the cables through
the slot
(pos. A)
. Fix support
(pos. 16)
to the boiler
B) mount the insulation jackets
(pos. 1, 2 and 3)
of the boiler
body and secure the 2 edges with the elastic straps supplied
in the accessory box, hooking them to the external fabric part
of the insulation.
C) Position the side panels
(pos. 4, 5, 6, 7, 8, 9)
with the lower
bend inside the L-shaped profile at the base and on top of
the boiler body and hook the upper part in the plate cuts.
To determine which is the right side and which is the left side,
refer to the cable gland plates
(pos. 10)
, they must face the
front of the boiler.
D) Connect the front reinforcement profile (pos. 11) to the two
sides
(pos. 4 and 7)
with screws 4,2 x 9,5 supplied
A
16
15
E) mount rear casing
(pos. 12 and 13)
with screws 4,2 x 9,5
supplied and the cable clamps moderately tightening.
F
) Fix the boiler data plate to the side panel after having greased
the relevant part with the specific solvent.
The plates are included in the document envelope.
XC-K 3
n.
side casing
n. piece
back casing
dx
sx
1000
2
2
1
1250
3
3
1
1500
3
3
1
1750
3
3
2 (pos. 12 - 13)
2000
3
3
2 (pos. 12 - 13)
2500
4
4
none
3000
4
4
none