24
3.11 - CONNECTION TO THE FLUE
The correct combination burner / boiler / chimney enables
a significant reduction of consumption and an optimal
fuelling with low polluting emissions.
The
FLUE (CHIMNEY)
must be resistant to heat and conden-
sation, thermally insulated, with hermetic seal, without restric-
tions or occlusions, as vertical as possible and dimensioned
according to the provisions of the standards in force
.
The
CONNECTION BETWEEN BOILER AND CHIMNEY
must
be realised:
- in compliance with the regulations and laws in force,
- it must have a section that is at least equal to the smoke outlet
fitting of the generator.
- with rigid conduits,
- heat resistant,
- resistant to condensation,
- to mechanical stress,
- hermetically sealed.
For the joints' seal, use materials resistant to at least 300°C.
ATTENTION:
The expulsion of exhaust gases must take
place without affecting the safety of work
-
ers or third parties.
Badly dimensioned and shaped chimney
and connection fittings between boiler and
chimney can amplify the combustion noise,
negatively influence the combustion param
-
eters, generate condensation problems.
We would also like to remind you of the need to provide ade-
quate cleaning devices and the withdrawal of smoke samples
for combustion analysis.
Summary of Contents for BAHR'UNO
Page 1: ...BAHR UNO INSTRUCTIONS ON INSTALLATION USE AND MAINTENANCE ...
Page 49: ......
