16
Installation instructions
3.9 - ASSEMBLY
INSTRUCTIONS
Fan assembly
Fit the fan to the smoke chamber.
fig. 11
fig. 12
IMPORTANT!
Before installing the fan, check the perfect
tightness of the bypass cover which links the
wood storage directly with the smoke chamber.
To do this, with the wood loading door open, act
manually on the control rod of the bypass simulating closing of
the door and make sure there is no gap.
If so, adjust the length of the rod.
Mount the bottom closing cover of smoke chamber with the
relative seal.
Wood must be loaded in as little time as possible to keep the
impeller of the fan from overheating and thus malfunctioning.
This problem occurs more quickly the more the wood loading
door is opened.
Assembling the handles
- Mount the screw and nut on the top door and screw the knob
(pos. 1, 2, 3).
Fit the knob (pos. 4) on the top door closing handle.
- Mount the screw and nut on the bottom door and screw the
knob (pos. 1, 2, 3).
- Install the air manifolds (pos. 5).
Adjustment of the primary and secondary air draughts
is described on page 43.
- Attach the flame control mirror (pos. 6) to the
sight glass on the bottom door.
4
1
1
2
2
3
3
6
5
