27
1.3 Introduction to the Symbols on LCD
2 Buttons
2.1 Buttons on the Wired Controller
No
Symbols
Description
1
Swing function.
2
Sleep function (3 types: sleep 1,sleep2 and sleep 3).
3
Running modes of the indoor unit (Cooling, Dry, Fan and Heating).
4
Defrosting function for the outdoor unit.
5
Gate-control function (this function is yet unavailable for this unit).
6
Lock function.
7
High, middle, low or auto fan speed of the indoor unit.
8
SHIELD
Shield functions.
9
TURBO
Turbo function.
10
MEMORY
Memory function (The indoor unit resumes the original setting state after
power failure and then power recovery).
11
MASTER
Master wired controller (this function is yet unavailable for this unit).
12
It blinks under on state of the unit without operation of any button.
13
SAVE
Energy-saving function.
14
Ambient/preset temperature value.
15
E-HEATER
Electric auxiliary heating function
16
BLOW
Blow function.
17
Timing value.
18
QUITE
Quiet function (two types: quiet and auto quiet).
19
SET
It will be displayed under the debugging mode.
Fig. 3 Buttons on the Wired Controller
User’s Instructions
