Unibrain 580 Page 29 User'S Operation Manual Download

Page: 29 / 72

Unibrain Fire-i 580/780/785/980 Operation Manual

Page 23

Read: Value=’1’ in operation Value=’0’ not in
operation
If A_M_Mode =1, this bit is ignored

ON_OFF

[6]

Write: ON or OFF this feature,
Read: read a status
0:OFF, 1:ON
If this bit=0, other fields will be read only.

A_M_Mode

[7]

Write: set the mode,
Read: read a current mode
0: Manual, 1:Auto

[8..19]

Reserved

Value

[20..31]

Value : Write the value in Auto mode, this filed is
ignored.
If “ReadOut” capability is not available, read value
Has no meaning

3.3.

Sharpness

This feature controls sharpness by enhancing the edges of image. By applying this feature the edge of the images is

sharpened against the ambient noise, which makes it more visible. The user can control the desirable level to obtain

the best result. If you do not prefer such signal manipulation, you may switch it OFF or set its value to ‘10’ (a value

of ’10’ equals turning OFF Sharpness).

For sharpness control inquiry and status register, follow the same definition as “BRIGHTNESS”.

3.4.

White Balance

Color models have the white balance feature which can be controlled automatically or manually, U/R (Red/Green) and

V/B (Green/Blue) alter the degree to which Red and Blue CCD component pixels are weighed to form composite pixels.

In manual mode you can adjust the white balance by altering the Blue and Red Value. One push white balance option

can be used for a non-interactive calibration in addition. Currently automatic white balance features are not supported.

Inquiry Register

Address

Name

Field

Bit

Description

50Ch

WHITE_BAL

_INQ

Presence_Inq

[0]

Presence of this feature

Abs_Control_Inq

[1]

Capability of control with absolute value

[2]

Reserved

One_Push_Inq

[3]

One push auto mode(Controlled automatically by

camera only once)

ReadOut_Inq

[4]

Capability of reading the value of this feature

On/Off_Inq

[5]

Capability of switching this feature On and OFF

Auto_Inq

[6]

Auto mode(Controlled automatically by camera)

Manual_Inq

[7]

Manual mode(Controlled by user)

Min_Value

[8..19]

Minimum value for this feature control

Max_Value

[20..31]

Maximum value for this feature control

Summary of Contents for 580









































































Search results

Summary of Contents for 580

Reviews:

Related manuals for 580

Brands by name

Popular brands

Unibrain 580, User'S Operation Manual

Search results

Summary of Contents for 580

Reviews:

Related manuals for 580

Brands by name

Popular brands