Unibor COMMANDO 40
Original Instructions
Nov 2019
5
4) SPECIFICATION
Maximum hole cutting capacity in .2/.3C steel = 1.1/2
”
dia. x 2
”
deep
Motor Unit
Voltages
120V 50-60Hz
Normal full load
10 A
Electro Magnet
45W
Size
6.1/2
” long
3.1/8
” wide
Holding Force at 20°C with
1”
minimum plate thickness
The use on any material less than
1”
thick will progressively
reduce the magnetic performance. If possible, substitute
material should be positioned under the magnet and work
piece to equate to a suitable material thickness. If this is not
possible, an alternative secure method of restraining the
machine MUST be used.
1800 lbs
Overall Dimensions
Height - minimum
20
”
Width (including Capstan fitting)
7
”
Length Overall (including Guard)
10.1/2
”
Nett Weight
32lbs
Part No.
CMD40
Maximum hand/arm vibration magnitude (measured at handle
during operation in accordance with ISO5349, using a
15/16” dia
cutter through a
½” mild steel plate).
Vibration emission value
a W= 2.892 m/s²
Uncertainty(K):1.5m/s²
Average noise level
during cutting at operator’s ear position.
LpA: 88.4 dB(A)
LwA: 101.4 dB(A)
uncertainty(K)
：
3dB(A)
Ear and eye defenders must be worn when operating this machine. Wear gloves to protect hands when operating the
machine.
These tools are UK designed and manufactured with globally sourced components and conform with the requirements
of EEC Document HD.400.1 and BS.2769/84
Suitable only for a single phase 50-60Hz A.C. power supply
DO NOT USE ON D.C. SUPPLY
Do not use your magnetic drill on the same structure when arc welding is in progress.
D.C. current will earth back through the magnet and cause irreparable damage.
WARNING: THIS APPLIANCE MUST BE EARTHED!
NB: ANY MODIFICATIONS TO THIS MACHINE WILL INVALIDATE THE GUARANTEE
