Unibor COMMANDO 40
Original Instructions
Nov 2019
4
▪
Inspect tool cords periodically and if damaged have it repaired by an authorized Unibor service
facility.
▪
Inspect extension cords periodically and replace if damaged.
▪
Keep handles dry, clean and free from oil and grease.
17. Disconnect tools from the power supply when not in use, before servicing or when changing
accessories such as cutters.
18. Form the habit of checking to see that keys and adjusting wrenches are removed from the tool before
turning it on.
19. Avoid unintentional starting. Ensure the magnet is off before plugging the machine in.
20. Use extension leads only intended for outdoor use when the tool is used outdoors.
21. The vibration emissions during actual use can differ from the declared total value depending on the
ways in which the tool is being used.
22. Watch what you are doing, use common sense and do not operate the tool when you are tired. Do not
operate the machine when under the influence of alcohol or any illegal substances.
23. Check for damaged or missing parts before use of the tool; it should be carefully checked to determine
that it will operate properly for its intended function.
24. The use of any accessory or attachment, other than ones recommended in this instruction manual, may
present a risk of personal injury.
25. Have your machine repaired by a qualified Unibor technician. This electric tool complies with the
relevant safety rules. Qualified persons using original spare parts should only carry out repairs
otherwise this may result in considerable danger to the user.
26. Never operate the machine if parts are missing or damaged.
27. Never direct jets of water or flammable liquids over the drill.
28. Operator must be physically able to handle the weight of the machine.
29. Operator should be trained in the use of the machine.
3) INFORMATION PLATE SYMBOLS
1 2 3 4
1.
Refer to the user manual for operational and safety issues with regards to this machine.
2.
Dispose of the machine and electrical components correctly.
3.
Eye protection must be worn when operating the machine.
4.
Ear defenders must be worn when operating the machine.
