VMM-T1 User Manual
3
Warranty
LIMITED PRODUCT WARRANTY: All Products manufactured by VINCENT ASSOCIATES®
(MANUFACTURER) are warranted to meet published specifications and to be free of defects in
materials and workmanship as defined in the specifications for 365 days - one year - (WARRANTY
PERIOD) from the date of original shipment of the product. DSS series shutters are additionally
warranted to achieve two million cycles within the WARRANTY PERIOD (as defined in the CYCLE
WARRANTY CRITERION). MANUFACTURER will, at its own option within the WARRANTY
PERIOD, repair or replace without charge any listed item discovered to be defective excepting
transportation charges. Burned out or otherwise damaged actuator coils are not covered under this
warranty. Any defective product returned to the MANUFACTURER must follow the RETURN
MATERIAL AUTHORIZATION PROCEDURE as defined below. This warranty does not extend to
cover damage resulting from alteration, misuse, negligence, abuse, normal wear and tear, or accident.
The MANUFACTURER will consider the return of unused equipment if returned within 30 days from
the original date of shipment, subject to a 20% restocking charge. This offer does not apply to used or
damaged equipment. This warranty extends only to the original purchase and is not available to any
third party, including any purchaser assemblies or other Products of which the goods may become
component equipment.
CYCLE WARRANTY CRITERION: One "cycle" is considered one open and one closure of the shutter.
DSS Shutter must be operated with the ED12DSS driver or equivalent H-Bridge type shutter driver
circuit at +10.7VDC across the actuator coil for the specified duration. DSS Shutter must be operated
within the defined environmental, electrical and mechanical specifications as listed on the device's data
sheet. After one year (WARRANTY PERIOD), the cycle warranty is null and void. If returned, the
device must be accompanied by a written statement indicating the approximate number of cycles
contained on the device, include all parameters to which the shutter was operated and follow the
RETURN MATERIAL AUTHORIZATION PROCEDURE as defined below.
RETURN MATERIAL AUTHORIZATION PROCEDURE: MANUFACTURER will only accept
returned Products from customers that have obtained an RMA (Return Material Authorization) number
from the MANUFACTURER. The customer must also include an itemized statement of defect(s). The
Product will then be evaluated per the MANUFACTURER'S standard repair guidelines. Any Product
which has been returned to the MANUFACTURER but which is found to meet the applicable
specifications and not defective in materials and workmanship shall be subject to the
MANUFACTURER's standard evaluation charge. The MANUFACTURER assumes no liability for
customer returned material.
LIMIT OF LIABILITY: The buyer's exclusive remedy and the limit of MANUFACTURER'S liability
for any loss whatsoever shall not exceed the purchase price paid by the buyer for the goods to which a
claim is made. MANUFACTURER does not give any implied warranties of merchantability, fitness for
a particular purpose, or of any other nature in connection with the sale of any Products.
Summary of Contents for VMM-T1
Page 1: ...User Manual VMM T1 Shutter Driver Timer 14 0020 Version 2 00 2013 1 800 828 6972 ...
Page 17: ...VMM T1 User Manual 17 VINCENT ASSOCIATES A V Figure 2 VMM T1 Front Panel Operator Controls ...
Page 18: ...VMM T1 User Manual 18 Notes ...
Page 22: ...VMM T1 User Manual 22 Figure 3 VMM T1 Rear Panel Operator Controls and I O ...
