UNIA ARES P, Operating And Maintenance Manual

Page: 19 / 34

OPERATING AND MAINTENANCE MANUAL ARES P / ARES ROLLER UP
- 17 -
3.4 Transport on highways
3.4.1 Mounted Machines
Depending on the accessories, width of the machine can exceed 3.0m
•
After finishing your work, lift the machine off the ground (10cm) and clean it out of soil and dirt
•
Apply pressure to the cylinder [A] , extending it
•
Fold the frame extensions [B] with the external discs (XL and XXL coulters). Remove the cotter
pin and the bolt, rotate the extension of 180° on the hinge and secure it in the upper position
with the bolt and the cotter pin
• Loosen the set screws and insert the deflector
[C]
(accessory)
• Pul out the securing bolt [E] and shift the stop [D] to the transport position (i.e. vertical); secure
the mechanism with the bolt [E] again.
• A unit consisting of a tractor and agricultural machine connected to it must meet the same
requirements as the tractor alone
• Adjust the chains tensioning the side tow bars (stabilizers) of the tractor accordingly before
driving; they should limit the excessive side movements of the unit
•
Observe the ‘Road Traffic Law’ regulations when driving on highways
Fig. 7: Transport