Uni-Trend UT4000 Series User Manual Download Page 79 | Manualshive

Page: 79 / 98

background image

68

UNI-T

®

UT4000 User Manual

Chapter 5

⎯

Service and Support

Warranty (UT4000 Series Digital Storage Oscilloscopes)

UNI-T (Uni-Trend Electronic (Shanghai) Limited) warrants that product produced and
marketed by it will be free from defects in materials and workmanship for a period of
three (3) years from the date of shipment by the authorized dealer. If any such product
proves defective during this warranty period, UNI-T will repair the defective product or
provide a replacement in exchange according to detailed provisions of the warranty.

To request maintenance and repair service or a full copy of the warranty, please contact
your nearest UNI-T sales and maintenance office.

Save and except the guarantee given herein or in other applicable warranty, UNI-T makes
no other express or implied guarantee, including but not limited to any implied guarantee
on the product’s tradability and suitability for any specific purpose. Under no
circumstance will UNI-T bear any liability for any indirect, special or subsequent loss.

Using the USB Upgrade Program

The USB upgrade program makes upgrade easier and more flexible. To use this function
follow the steps below :

1. The model name, software version and hardware version of your oscilloscope are

listed in Table 2-19.

2. The software that corresponds with the model and hardware version of this

oscilloscope, i.e the update document, is available for download online. Save the
document on a USB device (preferably a USB device recommended by us).

3. Power off the oscilloscope then insert the USB device. Then power on the

oscilloscope again. The prompt “Please press [F5] to continue or [F1] to cancel”, as
shown below, will appear on the screen.

Figure 5-1 USB upgrade confirmation

«
...
77
78
79
80
81
...
»

Summary of Contents for UT4000 Series



































































































Reviews:

No comments

Related manuals for UT4000 Series

Brand: DBX Bushido Pages: 12

Brand: Wahl Pages: 2

Brand: Laser Pages: 2

Brand: Lars Thrane Pages: 50

Brand: Rain-Flo Irrigation Pages: 16

Brand: Yanmar Pages: 49

Brand: Fagor Pages: 12

Brand: Baltic Pages: 68

Brand: H&S Pages: 76

Brand: ABB Pages: 33

Brand: Park House Healthcare Pages: 32

MIAMI J ADVANCED

Brand: Össur Pages: 35

Brand: Össur Pages: 38

Brand: Össur Pages: 8

Brand: Össur Pages: 72

Brand: Össur Pages: 76

Miami Lumbar Posteo

Brand: Össur Pages: 45

Brand: Össur Pages: 29

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands