UTR2810E Series LCR Meter
– User Manual
13
Operating Instruction
In this chapter you will learn the following
：
Boot up
First function operating
Second function operating
3.1 Boot up
1
）
Press
【
POWER
】
key to boot up the instrument.
2
）
Enter test state after delay, see Figure 3-1, the actual situation may different.
Figure 3-1 Test Mode
3.2 Measurement Parameter Setting
Use
【
direction key
】
or
【
rotary knob
】
to move the cursor to the parameter to be test, press
【
rotary knob
】
or
【
ENTER
】
to
enter parameter setting, use
【
direction key
】
or
【
rotary knob
】
to select the corresponding parameter, and then press
【
rotary
knob
】
or
【
ENTER
】
to confirm the setting.
In addition, press
【
PARA A
】
can quickly cursor location to parameter A, press
【
PARA B
】
can quickly cursor location to
parameter B.
3.2.1 Parameter A/B
Classification
Function
Description
Parameter A
（
primary
parameter
）
L
Inductance value
C
Capacitance
R
Resistance value
Z
Impedance value
G
Conductance value
Y
Admittance value
D
Loss factor
Q
Quality factor
