UTR2810E Series LCR Meter
– User Manual
11
2.3 Display Area
The UTR2810E display area is divided into the following parts, see Figure 2-3
Figure 2-3 Display Area
2.3.1 MEAS DISP
Dispaly Primary parameter Z/R/L/C/G /Y
Secondary paramter X/Q/D /R/Θ
（
deg
）
/Θ
（
rad
）
/B
2.3.2 SET DISP
(1) Paramter A
Z
：
Impedance value measurement
R
：
Resistance value measurement
L: Inductance value measurement
C
：
Capacitance value measurement
G: Conductance value measurement
Y: Admittance measurement
(2) Paramter B
X: Reactance measurement
Q
：
Quailty factor measurement
D
：
Loss value measurement
R
：
Resistance value measurement
Θ
（
rad
）：
Phase angle
（
arc
）
Θ
（
deg
）
: Phase angle
B
：
Susceptance value measurement
(3) Frequency
100 Hz
：
The current measured signal frequency is 100 Hz.
120 Hz
：
The current measured signal frequency is 120 Hz.
1 kHz
：
The current measured signal frequency is 1 kHz.
10 kHz
：
The current measured signal frequency is 10 kHz.
