User’s Manual Smart Digital Power Meter
Instruments.uni-trend.com
28
/
40
4. Press
【
←
】
or
【
→
】
key to select other submenu, or press
【
SETUP
】
key to exit SETUP menu.
·Explanation
supports RS232 and RS485 interface
，
both interfaces have the same baud rate, so it can be set
by the method in this section.
6.3 Modbus Communication Address
·Step
1. Press
【
SETUP
】
key to enter SETUP menu
，
press
【
←
】
or
【
→
】
key to select submenu“Addr” as
shown in the following figure
；
2. Press
【
ENTER
】
key to enter numerical value editing state
，
press
【
↑
】【
↓
】【
→
】【
←
】
key
to editing numerical value
；
3. Press
【
ENTER
】
key to save the setting
；
4. Press
【
←
】
or
【
→
】
key to select other submenu, or press
【
SETUP
】
key to exit SETUP menu.
·Explanation
Only when the communication command sets to Modbus, submenu“Addr” can display. The setting method
of communication command can refer to section 6.1
The communication address range of Modbus is 1-99.
