UNI-T UT71C, Operating Manual, Page: 45 / 72

Mode l UT71C/D/E: OPERATING MANUAL
H. Measu r i n g Tempe r a t u r e
Warni ng
To avoid harm s to you, please do not at te m p t to
inpu t vol t a g e s higher than 60V DC or 30V rms AC.
To measure temperature, set up the Meter as shown
in Figure 3-8 and proceed the following.
1. Set the rotary switch to
ºC ºF,
the display shows OL.
Short circuit the test leads to show the room
temperature. The Meter is default to Celsius
ºC
degree unit, you can change units by press the
BLUE
button once you have selected the temperature
function.
2. Insert the point contact temperature probe into the
Meter as figure 10.
3. Place the temperature probe to the object being
measured.
The measured value shows on the display after
several seconds.
ºC ºF
Figure 3-8. Temperature Measurement
43