Replacing the Fuses
To avoid electrical shock or arc blast, or personal injury or damage to the
Meter, use specified fuses ONLY in accordance with the following procedure.
Warning
Follow Figure 9 and proceed as follows to replace the Meter’s fuse:
l
Turn the calibrator off and remove all connections from the terminals.
l
Remove the screw from the battery compartment, and separate the battery
compartment from the case bottom.
l
Remove the three screws from the case bottom, and separate the case bottom
from the case top.
l
Remove the fuse by gently prying one end loose, then take out the fuse from
its bracket.
l
Install ONLY replacement fuses with the identical type and specification as
follows and make sure the fuse is fixed firmly in the bracket.
Model UT712: OPERATING MANUAL
17
