18
To avoid harms to you or damages to the Meter from
electric shock, please do not attempt to measure
voltages higher than 1000V though the reading may
be obtained.
The DC Millivolt ranges are: 80.000mV, 800.00mV. To
measure DC Voltage, connect the Meter as follows:
In this range, the Meter has an input impedance
higher than 4000M
¡
When DC mV voltage measurement has been
completed, disconnect the connection between
the testing leads and the circuit under test, and
remove the testing leads away from the input
terminals of the Meter.
¡
¡
¡
¡
¡
¡
¡
¡
¡
¡
¡
¡
Summary of Contents for UT70D
