UNI-T UT516B User Manual Download Page 19 | Manualshive

Page: 19 / 21

background image

35

36

10. Communication Function (Including Software)

The tester can be connected with a PC via the dedicated USB cable, as shown in Picture 23.

Download the corresponding PC software from the official website of Uni-Trend (refer to UNI-T Documents
Download Operation Guide), and install it according to the installation instructions.
Support Windows Vista, Win 7 or above system.
Use the USB cable to connect the tester with the PC. Short press the USB button on the tester and the
“USB” symbol will appear in the upper left corner of the LCD. The data of the tester is available for USB
communication now.
Run the PC software and click on the "Connect" option. Then the PC is available for USB communication
and the data of the tester will be displayed on the PC in real time.
Upload the data of the tester to the PC for saving, printing, analysis and other operation.
Data of the PC cannot be transmitted to the tester.

Picture 23

11. Use of Power Adapter

The power adapter operates at 220V/50Hz and has an output current of 1A. The tester can function properly
with the power adapter but cannot be charged. When the power adapter is enabled, power supply will be
automatically switched to the power adapter with battery power disconnected. Connection method of the power
adapter is shown in Picture 24.

Picture 24

Note: The power adapter is specially designed for UT516B. It cannot be replaced by other power adapters
as this may damage the tester or cause inaccurate measurement.

UT516B User Manual

UT516B User Manual

«
...
17
18
19
20
21
»

Summary of Contents for UT516B






















Reviews:

No comments

Related manuals for UT516B

Brand: ABB Pages: 11

Brand: FJC Pages: 2

Brand: Parker Pages: 5

Brand: Bacharach Pages: 31

Brand: Backyard Play Systems Pages: 52

Brand: Backyard Play Systems Pages: 19

Brand: Backyard Play Systems Pages: 44

Brand: Bacharach Pages: 2

Brand: DANLERS Pages: 2

Brand: Haas Automation Pages: 26

Brand: Faderfox Pages: 8

Brand: Eaton Pages: 2

Brand: Eaton Pages: 20

Brand: Haag-Streit Pages: 18

Brand: Haag-Streit Pages: 20

Brand: V-TEK Pages: 2

Brand: V-TEK Pages: 112

Brand: Palmer Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands