manualshive.com logo in svg

UNI-T UT50E, Operating Manual

Share
Download
UNI-T UT50E Operating Manual Download Page 13

Measurement Operation(1)

A. DC Voltage Measurement 

(see figure 3)

Warning

To avoid harms to you or damages to the Meter from
electric shock, please do not attempt to measure
voltages higher than 1000V or 750V rms although
readings may be obtained.

The DC Voltage ranges are: 200mV, 2V, 20V, 200V and
1000V.  To measure DC voltage, connect the Meter as
follows:

( figure 3)

13

1.    Insert the red test lead into the 

V   

  

o

C input

       terminal and the black test lead into the

 COM 

input

       terminal.
2.    Set the rotary switch to an appropriate measurement
       position in 

V 

    range.

3.    Connect the test leads across with the object being
       measured.
   The measured value shows on the display.

l

    Make sure the Sleep Mode is not on if you found

       there is no display on the LCD after turning on the
       Meter.

l

   Make sure the Low Battery Display     is not on, otherwise

      false readings may be provided.

l

   Pay extra attention to the

 symbol which is located

      besides the input terminals of the Meter before carrying
      out measeurement.

red

black

Model UT50E: OPERATING MANUAL

Summary of Contents for UT50E





































Reviews:

No comments

Brands by name

Popular brands

Load more brands