manualshive.com logo in svg

UNI-T UT39E, Operating Manual

Share
Download
UNI-T UT39E Operating Manual Download Page 2

Overview

Warning

To avoid electric shock or personal injury, read the
“Safety Information” and “Rules for Safety
Operation” carefully before using the Meter.

Digital Multimeter Model UT39E (hereafter referred to
as “the Meter”) is a 4 1/2 digits with steady operations,
fashionable structure and highly reliable hand-held
measuring instrument. The Meter uses large scale of
integrated circuit with double integrated A/D converter
as its core and has full range overload protection. The
Meter not only can measure AC/DC Voltage, AC/DC
Current, Resistance, Capacitance, Transistor, Frequency,
Diodes and Continuity, but also has Data Hold and Sleep
Mode features.

The Meter comes with a holster which can provide
sufficient and anti-shaking.

Unpacking Inspection

Open the package case and take out the Meter.  Check
the following items carefully to see any missing or
damaged part:

Item

1

2

3

4

Description

English Operating Manual

Test Lead

Holster

9V Battery (NEDA 1604 or 6F22 or 006P)

Qty

1 piece

1 pair

1 piece

1 piece

In the event you find any missing or damage, please
contact your dealer immediately.

 

2

Model UT39E: OPERATING MANUAL

Summary of Contents for UT39E

























Reviews:

No comments

Brands by name

Popular brands

Load more brands