User’s Manual Series
Instruments.uni-trend.com
20
/
40
7.
<Test>
7.1 Numerical Reading
Press
【
Test
】
on the panel to enter <Test> page.
Note: If user need to record the data, please insert USB into the port of the instrument befor
data acquisition. Start the test after USB is identified.
Display mode: numerical reading, curve chart, histogram
Numerical reading is the best way to read one or more channel values at some point. Press
【
Start
】
key, the instrument will start data acquisition. A green flashing cursor at the top of
the screen indicates that the data is being collected, test values will show with green color as
shown in Figure 7-1. Press
【
Stop
】
key to terminate data acquisition.
Figure 7-1 Temperature Numerical Reading
Check test data of other channel by page switching or up/down key
During data acquisition, user can set the following parameters based on your own needs.
Different font:
【
Zoom+/-
】
Key is used to switch the font size. Every time you press
【
Zoom+/-
】
