32
33
Under HOLD mode, press POWER button to switch off.
If under data access mode, first long press POWER button (over 3
seconds) to exit and return to receiving mode, then repress to power off,
indicated by
End
icon during this process.
(2) Data Receive
The receiver will immediately go into receiving mode after power on and
display on-line results if data signal have been sent back. If not, the
receiver will continue to search for signals and dynamically display
no- -
icon.
(3) Data Hold
Under data receiving mode, short press HOLD button to keep the LCD
display, indicated by HOLD
icon. Press again to cancel the operation
and return to receiving mode, then
HOLD
icon will disappear.
(4) Data Save
Under receiving mode, the receiver will automatically number current data
when pressing HOLD button to keep data.
MEM
icon displays one
time during the process. The maximum storage is 99 sets and achieved
when
FULL
icon continuously flashes to indicate the memory needs
clearing for second save.
(5) Data Access
Under receiving mode, press HOLD + POWER buttons to enter into data
access mode.
MR
icon and at the same time data NO.01 display on
LCD, then you can scroll up or down to access more data by using HOLD
or POWER button. If final set of data is obtained, the meter will
automatically return to the first set.
Long press POWER button (over 3 seconds) to exit and return to data
receiving mode, indicated by
End
icon during this operation.
(6) Data Delete
Under data access mode, press HOLD + POWER to clear the memory
and return to data receiving mode, indicated by
dEL
icon during this
process.
