20
21
.
End
display to exit the operation
*
.
no- -
dynamic display No signal received.
VII. Operating Instructions
Please Check if there is any damaged parts or not before safe use.
Install the battery as required in the manual
Notes:
1. Testing Instructions
Press POWER button to switch off under HOLD mode
(1) Power On/Off
Press POWER to power on, display LCD and enter into general
measuring mode. You should change the battery if dark LCD appears after
power on and may be caused by low battery voltage. To conserve power
energy, the meter will automatically switch off 15 minutes later after power
on, indicated by 30 seconds of LCD flashing. And you can continue
operations by pressing POWER button to stop LCD flashing.
