d. Connect the test leads across with the object being measured.
The measured frequency value or duty cycle value shows on the display.
a. Insert the red test lead into the
Hz
terminal and the black test lead into the
COM
terminal.
b. Set the rotary switch to Hz.
c. Connect the test leads across with the object being measured.
2. UT206A
When frequency and duty cycle
measurement has been completed, disconnect
the connection between the testing leads and the circuit under test, and remove
the testing leads away from the input terminals of the Meter.
The measured frequency value shows on the display.
Note
Model UT205A/206A: OPERATING MANUAL
26