Service Manual
UPO1000X Series
Instruments.uni-trend.com
17 / 31
5.
If you want to reinstall the rear panel, execute the steps in reverse.
Remoce Power Module
The following process is describes the removal and replacement of power module.
Precondition
•
To prevent static damage to the components while working on the instrument, wear properly grounded anti-static
wristbands and foot bands, and use anti-static pads in a tested anti-static environment.
•
Take down the rear panel.
•
Remove the rear module.
Steps
1.
Use T10 quincunx screwdriver to move four screws from the rear panel and take down the power cover.
