UDP6720 Series Digital Control Power Supply
User’s Manual
18
List Mode (Time Function) and Delayer Mode
List Mode
List mode can setup multiple testing program, it can set 48 groups of independentant voltage, current and parameter of
output duration time.
Delayer Mode
Delayer mode can setup multiple testing program to control output status, which is set count to control output status is
on or off, and the time interval of switch can also set by point to point. Delayer mode can set 48 output status groups to
control parameter.
Output parameter of list/delayer mode can all store in internal storage. It has powerdown function. Storage space for
each group is 48
Operating Steps
1. Push power supply switch to turn on the instrument;
2. Turn on list mode/ delayer mode
：
Push arrow key
or
to enter setup interface of list/delayer mode. It can be circular switch.
Notice
：
a.List/delayer mode and channel output function can’t use at the same time, it can only choose either-or;
b.When List mode status is pause, delayer mode can’t set parameter. It should enter setup interface of list mode to switch
to
, and the status is pause and then to set parameter;
3. Connect with load
；
4. Set parameter of list/delayer mode
；
Please refer to section Parameter Setting of List Mode and Parameter setting of Delayer Mode.
5. Enable timing/delayer output
；
In timing/delayer interface, rotate rotary knob
to
and push
to enable timing/delayer output
function. Symbol
turn to
and status bar will also change to “stop” to “run”;
6. Disable timing/delayer output
；
In timing/delayer interface, rotate rotary knob
to and push
to disable timing/delayer output function.
Symbol
turn to
and status bar will also change to “run” to “stop”;
Another shorcut to disable output function, push
key to turn off timing/delayer function in any interface.
Parameter Setting of List Mode
Interface of List Mode
