UNI-T MIE0149, Owner'S Manual, Page: 24 / 54

Owner’s manual
24
EN
Stake out function
One or two different distances (a and b) can be entered into the
device and then used to subtract from defined measured lengths.
Press button repeatedly until 0.000 appears on the display
and the cursor flashes. Use + and – buttons to adjust the desired
value and then press button to start the measurement. The
distance between the device and stake out point is displayed on the
display. At a distance of 0,1 m to the next stake-out point, an acoustic
signal sounds. When the stake-out point is reached the device will
issue signal sounds with greater frequency. Press
button to
turn off Stake out function.
TECHNICAL SPECIFICATIONS
General characteristics
Measurement distance 0,5 m ~ 70 m
Measuring accuracy ±1,5 mm
Battery type 2x AAA (1,5 V)
Dimension 126 x 54 x 28 mm
Weight 175 g (without batteries)
Laser type 620-690 nm, <1mW
Laser class Class II
Single measurement time 0,25 ~ 4 s
IP 54
Environmental requirements
Operating temperature -10°C to +50°C