8
When the operational life of your device is over, dispose off it in accordance with valid rules and
regulations. Your product is made of metal and plastic parts that may be recycled when separated.
1. Disassemble all parts.
2. Separate all parts according to the material they are made of (e.g. metals, rubber, plastics, etc.).
Take the separated parts to the recycling facility near you for further processing.
Information about the locations of recycling centres may be found at your local City office or throughout an
Internet search.
If the machine breaks down, send it back to the vendor for quick repair.
Please, enclose brief description of the defect. That makes repair easier. If the machine is still covered by
warranty, enclose the warranty card and proof of purchase receipt. After the warranty period expires, we
repair your machine for a special price.
To prevent possible damages during shipping, packed the machine carefully or use the original packaging
material. We are not liable for shipping damages due to incorrect packaging of your machine. If making
a claim at the shipping company the level and method of packaging plays a major role during claim evaluation
process.
Note:
Pictures and contents in this manual may slightly differ from the actual product or accessories.
It is due to continuous improvement of our products. Such small differences have no effect on the product
functionality.
DISPOSAL
CAUTION
5
that may cause safety hazards or injuries during work. Tripping and fall may cause serious injuries, namely
if the falling person hits the steel rope.
•
Never overload the steel line. Observe the maximum capacity shown in the chart. Not even temporary
impact load may be stronger than the maximum allowed load.
•
Check the reel carefully before each use. Any damaged part must be repaired or changed in authorized
service centre.
•
Use only identical and genuine spare parts during repairs. Using unauthorized or unsuitable parts may
cause severe damages to the machine property or may cause personal injuries or death.
•
When reeling the line in or out use protective leather gloves. To correctly rewind the line, you must keep
the rope under small tension all the time. Hold the rope with one hand and use the other hand to reel the
rope in. Try to face away from the load and try to stand as close to the middle as possible. When winding
the line in make sure that the line is reeled in towards the centre of the reel drum. Keep it under tension
and observe that the turns are finished evenly on the drum.
•
Make sure the rope will not slip out during reeling in.
•
Do not use the reel if the hook safety clamp is damage or not working properly. It is prohibited to use your
machine without properly functioning hook clamp.
•
This hand reel is used for horizontal pulling only. It is prohibited to use this reel for lifting
objects or animals.
Rope reeling mechanisms are not designed for boat anchoring or pull-cart/trailer fastening. If you need
to do such work, use special equipment designed for this type of work.
Power equipment
•
If your machine is equipped with depressed springs, use suitable device to release them slowly and safely.
•
Before throwing the packaging material out, make sure no part is left inside. If so, take it out and install it.
Use the part listing for check-up and the installation drawing for guidance.
Anchoring holes layout and dimensions
•
Mount the reel on a solid structure that is capable of withstanding load of max. 2,500 kg). To mount the
reel use screws M10/8.8, safety nuts and washers.
ASSEMBLY
