4
•
Before use, make sure all screws are tighten securely.
•
Perform maintenance regularly. Before use make sure the machine is in good working conditions
and without any damage.
•
Use only original spare parts during repairs.
•
Using non-original spare parts or other parts not approved by the manufacturer may cause injury to the
operating personnel.
•
Use this machine only for work that is capable of handling. Do not overload tools, accessories or the
machine. For large work volume use more powerful machine.
•
Do not overload your device. Measure the work load in such way, so it could be done with comfortable
speed. The warranty does not cover damages caused by overloads.
•
Do not expose to extremely high temperature or direct sunlight.
•
This machine is not designed for use in humid environments or under water.
•
if you are not using your machine, store it in a dry and safe place, out of reach of children.
•
Before turning your device on, make sure that all safety elements are working properly and effectively.
Make sure all moving parts are in good working conditions.
•
Before use make sure that no part is cracked or stuck, Make sure all parts are attached and assembled
as designed. Beware of all other conditions that may have a negative effect on the proper functioning of
your device.
•
If not stated otherwise in this manual, all damaged parts must be repaired or changed.
Riveting
•
Do not use the machine unless completely assembled according to instructions contained in this manual.
•
Before throwing the packaging material out, make sure no part is left inside. If so, take it out and install it.
Use the part listing for check-up and the installation drawing for guidance.
Riveting head drawing (dimensions in mm)
ASSEMBLY
OPERATION
about 75
