Made in China
Uni-Com (Global) Ltd.
1 & 2 Enterprise Way,
Edenbridge, Kent, TN8 6EW
+44 (0)1732 865238
www.uni-com.co.uk
My door chime is not working?
• Replace the batteries in the chime unit.
• The chime unit may not be receiving a signal from the bell push, this can be caused by internal walls or uPVC frames. Move the chime unit closer to the
bell push.
• The chime unit could be receiving interference from other electrical and wireless devices. The common cause for this is that your chime unit is picking
up outside interference from other wireless transmitters. Do not worry, all Uni-Com door chimes are programmed with 256 randomly selected channels
to help avoid such a problem:
(1) Ensure the chime unit operating mode is switched to light and sound.
(2) Remove the batteries from the chime unit. Press and hold the button, while continuing to hold the button reinsert the batteries. Release the
button only when the door chime lights and sounds.
(3) Press and hold the button, after the chime unit sounds and light you will hear a double “beep”. While continuing to hold the button press your
bell push. Release the button and wait for another double “beep”.
Your door chime will now be set up on a different channel.
As stated above the channels are randomly selected so you may need to repeat the above process more than once.
Troubleshooting guide
Portable door chime with kinetic bell push
Model: 66392
Please do not hesitate to contact our friendly customer service team who will be more than happy to help you with any
problems you are experiencing with your door chime set up
How do I add another chime unit to my existing door chime set up?
All Uni-Com kinetic bell push door chimes work together and you can add unlimited chime units to your set up. This will increase the sound area and
means you can have a chime unit in every room in your house if you wish.
(1) Ensure the new chime unit operating mode is switched to light and sound. Press and hold the button, after the chime unit sounds and lights you will
hear a double “beep”. While continuing to hold the button press your bell push. Release the button and wait for another double “beep”.
When you press your bell push the new and existing chime units will sound and light simultaneously.
How do I add another bell push to my existing door chime set up?
A maximum of 4 bell pushes can be paired to the same chime unit.
(1) Ensure the chime unit operating mode is switched to light and sound. Press and hold the button, after the chime unit sounds and lights you will
hear a double “beep”. While continuing to hold the button press your new bell push. Release the button and wait for another double “beep”.
Specification
Frequency: 433.92MHz
R2 device
Hereby, Uni-Com (Global) Ltd declares that the radio equipment type door chime is in compliance with the Directive 2014/53/EU. The full text of the EU Declaration of Conformity is
available to view at www.uni-com.co.uk.
Safety warning
Keep out of reach of children. For indoor use only (operating temp: 0°C to 40°C). Do not drop either unit or subject to excessive blows. The bell push is weather resistant, do not
submerge. Do not mix new and used batteries. Do not mix different types of batteries. Exhausted batteries must be removed
immediately. Failure to follow these instructions could result in fire, electric shock, injury or damage to persons, product or property and will invalidate the guarantee.
Batteries
The chime unit uses 3 x AA batteries. They should be removed prior to disposal.
Help the environment by disposing of your products and batteries responsibly.
Guarantee
This product is guaranteed for one year from the date of purchase against faulty parts or workmanship.
It does not cover batteries or physical damage to the units. Proof of purchase required. This does not affect your statutory rights.
