background image

 

CHARGING THE BATTERIES 

 

1.  On the headphone, press the “Power ON/OFF” Switch until the Power 

Indicator is off. 

2.  To recharge the headphone batteries, place the headphone on the 

transmitter, taking care to ensure that the Charge Contacts touch the 

transmitter's charge prongs. 

3.  The charge process starts automatically and the Charge Indicator glows. 

Be sure to charge new batteries for 24 hours before using them for the 

first time in the headphone. 

 

WARNING: 

Never attempt to recharge conventional dry cells. Use the rechargeable 

batteries supplied with the product as these batteries are specially designed 

with side charging contact. 

Never use another type of battery or non-rechargeable batteries to replace 

the rechargeable (LR03/AAA) batteries supplied. When the headphone are 

not in use, switch Off the headphone to avoid damaging the batteries. 

The batteries must always be fully charged before use. An initial

 

24 hour 

charge is required to guarantee an acceptable service life for the 

rechargeable batteries. Always ensure that the headphone are switched to 

the Off position while the batteries are charging. 

 

 

IMPORTANT: 

This unit should be operated with rechargeable batteries only. When 

replacing the batteries or when disposing of the unit, always comply with 

applicable laws relating to the disposal of batteries. Please place them in a 

 

7

proper disposal container to ensure that they are eliminated safely and in an 

environmentally-friendly way. Thank you. 

 

 

Only use rechargeable batteries of the type specified under the “Technical 

specifications” heading. 

The rechargeable batteries supplied with the headphone must absolutely not 

be taken apart, disposed of in an open fire or short circuited. 

 

TECHNICAL SPECIFICATIONS

 

 

Transmission mode   

: UHF stereo 

Carrier frequency 

 

: Ch 1 : 915.48    – 915.55 MHz 

      

Ch 

915.98 

 

– 

916.02 

MHz 

 

 

 

 

 

  Ch 3 : 916.48   –  916.55 MHz 

Operating voltage 

 

: Transmitter – 8 V 200 mA 

Receiver    – 2.4 V (two rechargeable batteries, 

LR03/AAA size) 

Frequency response   

: 7 Hz – 10 KHz 

Distortion 

 

 

  : 

<2% 

Signal-to-noise ratio   

: >50 dB 

Channel separation   

: 30 dB 

Range 

 

 

 

: 150 feet (open area) 

 

 

 

 

 

Reviews: