www.ungerglobal.com
www.ungerglobal.com
14
15
HydroPower® RO
General safety regulations
3
About the HydroPower RO
3.1
Using the HydroPower RO
3.1.1
Intended use
The HydroPower RO is used for the filtration of municipal water by demineralization for the purpose of glass
and surface cleaning.
The HydroPower RO is intended for commercial use only.
The HydroPower RO may only be connected to municipal water lines.
The use of the HydroPower RO in any way other than as described in this manual, including for bacteria
removal, is prohibited.
This applies in particular to the use of the HydroPower RO for bacteria removal.
3.2
Technical specifications
3.2.1
Operating conditions
Ambient temperature [°F/C]
41-104 / 5 … 40
Water temperature [°F/C]
41-77 / 5 ... 25
ATTENTION
Material damage due to improper handling.
Ensure that the incoming water is of known drinking quality.
The drinking (tap) water must be free of iron, manganese and heavy
metals (max. 0.2 ml / l iron, 0.05 mg / l manganese), the maximum silicate
(SiO2) content must not exceed 20 mg / l. It must also not contain barium
and strontium.
3.2.2
Electrical specifications
Primary electrical connection [V / Hz]
11
0
V / 60 Hz
Power consumption
0.37 kW
3.2.3
Protection types of electrical components
Electric motor
IP 44
Pump Control
IP 65
